superb acoustic tone - 2 channels

For many years now AER has been the first choice in acoustic amplification for most players in the know.

If you want clean, accurate reproduction of your instrument’s voice, 2 clean acoustic channels and a powerful 60W rating, this really is as good as it gets. Price includes a deluxe padded flight bag (see picture).

Forget the shrill, hard sound of the competition and get something that actually sounds acoustic... but louder!

Rating: Rating: 60 Watt / 4 ohm rms

Speaker: 8’ twin-cone speaker-system ( 96 dB 1w/1m, freq. range 60Hz-18kHz )

Cabinet: 0.59’ 3(15 mm) birch plywood

Dimensions: H: 10.24’ 3(260 mm) x W: 13.00’ 3(330 mm)x D: 19.06’ 3(230 mm)

Front Panel

(from left to right):

Channel 1:

• Input socket for a 6.3 mm jack plug
• High/Low switch to adjust input sensitivity
• High impedance only instruments with a piezoelectric pick-up,
• Low for instruments with active preamplifiers and magnetic sound pick-ups
• Clip overload indicator
• Gain input level control
• Colour mid-range contour filter
• Bass tone control for bass
• Middle tone control for mid-range
• Treble tone control for treble

Channel 2:

• Input XLR combination with a socket for a 6.3 mm jack plug and XLR male socket
• Line/Mic switch to adjust input sensitivity
• Line: sources with line level, instruments with active preamplifiers and magnetic sound pick-ups,
• Mic: symmetrical microphone input with 30 V phantom source
• Clip overload indicator
• Gain input level control
• Bass tone control for bass
• Treble tone control for treble
• Eff. Pan panorama control to distribute the effects between the channels
• Select switch for two effect programmes (reverberation, reverberation/delay)
• Return level control for the internal effect
• Power power indicator lamp
• Master level control for the overall volume

Rear Panel

Rear (from left to right):
Phones headphone output
Tuner output for a tuner after the master control
Line-out preamplifier output after the master control
DI-out XLR output before the master control
Send output for an external effect device
Return input for an external effect device or another signal source, for example
CD player
F/S connection for a double foot switch with which the effects can be
switched on and off (See 4. Summary of Operations).
Power combined mains switch with a mains socket and a fuse holder
(1 A slowblow)